MASSAGE

NECK MASSAGER

The Vidawell Neck Massager adopts a combination of low frequency electric, magnetic and heat therapy. This helps stimulate blood flow and relax the muscles which can reduce inflammation, pain and fatigue.

$199.00

Quantity

-
+
  • LCD Controller
  • 6 Vibration modes
  • Magnetic and infrared heat therapy
  • Electrical impulse modes
  • Timer
  • Auto adjustment to the curve of the neck
  • Rechargeable 3V Lithium battery
  • Charge time 3-4 hours
  • Recommended usage time 15 minutes, twice per day
  • Home, travel or office use
  • Remote control (CR2032 battery included)
  • AC Adaptor included

Charging your Vidawell Neck Massager

Plug the Adaptor into the unit and the power supply.

Switch the ON/CHARGE button to CHARGE.

If the unit is left on while not in use it will lose battery charge.

It takes about 3-4 hours to fully charge.

Put the unit back on charge once it has been used, so that it is ready to use for the next time.  Remember to switch the ON/CHARGE button to CHARGE.

The infrared light emission window on the controller should be used directly opposite the infrared light receiving on the main unit - if you hold the controller in front of you with the neck massager in the position where the LCD display panel on the massager is facing away from the back of your neck, you will be in the correct position.  This is to ensure safe use of the massager.

Do not use this device in the following conditions.

  • If you are pregnant
  • If you have a cardiac pacemaker, artificial joints, or electronic implants.

or if you suffer from any of the following complaints

  • Diabetes
  • Circulation disorders
  • Varicose veins
  • Open wounds
  • Broken skin
  • Inflammation of skin or veins

Do not use the device when you are standing in water.

Do not retrieve the device if submerged in 

 

 

Once fully charged simply turn the Vidawell neck massage unit ON/CHARGE button to ON.

Fit the device around your neck with the two arms facing forward and the metal electrodes along the back of your neck.

Using the remote control directly in front of you, press the power button.  Note that you will hear a buzz and a green light will appear on the LCD display of the massage unit to indicate start up.

The LCD on the remote will indicate status into the AUTO MODE.  In this mode you will experience multi function vibration massage, electrical impulse, high heat and 15 minute timer.

To end use, simply press the power button again on the remote. 

To use different modes, simply use the < and > buttons to choose alternative functions (Electrical Impulse, Vibration Massage, Heating and Time)  and choose different intensity for heat, electircal impulse and vibration.

Switch the massage unit back to CHARGE and plug into power supply to get ready for the next use.